欢迎访问欢迎访问天桥区欣飞板业经销处!
阳光板、耐力板、FRP(波浪瓦)、灯箱片
我们只生产质量保障的阳光板等产品

统一服务热线:

15806664558

首页>新闻中心>如何防止济南阳光板损坏?
产品分类 PRODUCTS
联系我们

天桥区欣飞板业经销处

联系人:焦经理 

电话:15806664558 

手机:15806664558
          15066129603
          13969012996
地址:济南市历城区历山北路佳园装饰材料南区A7-30号


如何防止济南阳光板损坏?

来源:http://www.wanzhongyue.com/ 日期:2020-06-09 发布人:julong 浏览次数:

  济南阳光板被广泛用于现在的生活,我们是在公共汽车站,购物和其他地方的图可以看到,阳光板的应用范围不仅如此,因为阳光板的应用范围很广,所以很多商人更多时间阳光板,济南阳光板通常是选择高质量的膜的耐紫外线和高品质树脂制成的,但是为了得到一个好的表现,其生产的固化程度也不容忽视。因为随着太阳板固化程度的增加,其硬度、机械强度也会增加。阳光板在使用中必然要受到外力的作用,为防止其被外力破坏必须控制在规定的范围内。
  Jinan sunshine board is widely used in our daily life. We can see from the pictures of bus stops, shopping malls and other places that the application range of sunshine board is not only this, because the application range of sunshine board is very wide, so many businessmen spend more time on sunshine board. Jinan sunshine board is usually made of high-quality UV resistant film and high-quality resin, But in order to get a good performance, the curing degree of its production can not be ignored. Because with the increase of the curing degree of the solar panel, its hardness and mechanical strength will also increase. In order to prevent the solar panel from being damaged by external force, it must be controlled within the specified range.
济南阳光板
  如何正确安装太阳板防止破损
  How to install the sun plate correctly to prevent damage
  1、首先检查骨架,必须光滑,无焊接疤痕、毛刺。骨架必须完全干燥,没有挥发性溶剂。
  1. First, check the skeleton, it must be smooth without welding scar and burr. The skeleton must be completely dry and free of volatile solvents.
  2. 将丁基防水胶带铺在骨架的两侧,形成一个小水槽。
  2. Lay butyl waterproof tape on both sides of the framework to form a small water tank.
  3.将阳光板放置在骨骼上,并在板之间保留伸缩缝。
  3. Place the sun plate on the bone and keep expansion joints between the plates.
  4. 按EPDM在印版之间的界面分层。
  4. Press EPDM to layer the interface between plates.
  5. 用自钻螺丝固定。
  5. Fix it with self drilling screws.
  上述预防济南阳光板损伤的方法,一些制造商为了增加韧性的阳光板,将添加塑化剂在生产的过程中,虽然会提高阳光板的灵活性,但材料的强度将大大受到影响,从而缩短使用寿命。为了保证济南阳光板的诚信,这样的做法必须杜绝。
  In order to increase the toughness of the solar panel, some manufacturers will add plasticizer in the production process, although it will improve the flexibility of the solar panel, but the strength of the material will be greatly affected, so as to shorten the service life. In order to ensure the integrity of Jinan sunshine board, such practices must be put an end to.
相关新闻


  天桥区欣飞板业经销处            联系人:焦经理            座机:15806664558
 手机:15806664558        15066129603       13969012996
  技术支持: 济南诺商   鲁ICP备14016125号 网站地图 XML TXT

统一服务热线

15806664558 

鲁公网安备 37010502001033号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】