欢迎访问欢迎访问天桥区欣飞板业经销处!
阳光板、耐力板、FRP(波浪瓦)、灯箱片
我们只生产质量保障的阳光板等产品

统一服务热线:

15806664558

首页>新闻中心>济南阳光板固定的注意事项
产品分类 PRODUCTS
联系我们

天桥区欣飞板业经销处

联系人:焦经理 

电话:15806664558 

手机:15806664558
          15066129603
          13969012996
地址:济南市历城区历山北路佳园装饰材料南区A7-30号


济南阳光板固定的注意事项

来源:http://www.wanzhongyue.com/ 日期:2020-06-22 发布人:julong 浏览次数:

其实说到阳光板,相信大家都不会陌生,但是有些人对阳光板的熟悉度还停留在表面阶段,一般很少有人知道固定阳光板时要注意什么?毕竟在阳光板安装过程中,固定很重要,下面我们就和阳光板厂家一起来看一下固定的注意事项吧!
In fact, when it comes to solar panels, I'm sure you are not unfamiliar with them, but some people are still familiar with the solar panels at the surface stage. Generally, few people know what to pay attention to when fixing the solar panels. After all, fixing is very important in the installation process of the solar panels. Let's take a look at the fixed precautions together with the solar panel manufacturers!
1、上螺丝不可过紧,否则可能引发应力,引起板面局部裂纹。
1. Do not over tighten the upper screw, otherwise it may cause stress and local cracks on the plate surface.
2、固定钉钉头直径应比螺丝柄部直径大1.5倍以上,并加以防水胶,不要钉头直接压迫板面,以减少压力。
2. The diameter of the fixed nail head shall be more than 1.5 times larger than the diameter of the screw handle, and waterproof glue shall be applied. Do not press the plate surface directly by the nail head to reduce the pressure.
3、阳光板厂家在安装过程中,不可先固定两端后固定中间,应先固定一端并沿同一方向施工,否则会引起中间应力集中,使产品变形或开裂。
3. In the process of installation, the manufacturer of solar panel shall not fix the two ends first and then fix the middle. One end shall be fixed first and the construction shall be carried out in the same direction, otherwise the stress concentration in the middle will be caused and the product will be deformed or cracked.
4、防水胶不可使用PVC胶垫或沥青成分的防水胶布;密封胶,一定要选用中性玻璃胶,切勿使用酸性胶。
4. PVC rubber pad or asphalt waterproof tape shall not be used as waterproof glue; neutral glass glue shall be used as sealant, and acid glue shall not be used.
5、预留膨胀空间。
5. Reserve expansion space.
6、假如在波浪板下面增加一层阳光板时,下层阳光板的固定处一定要加金属条,否则由阳光板的自重会引起阳光板下垂,导致螺丝周围的阳光板出现裂纹。
6. If a layer of sunshine plate is added under the wave plate, the fixed position of the sunshine plate at the lower layer must be provided with metal strips, otherwise the self weight of the sunshine plate will cause the sunshine plate to sag, resulting in cracks of the sunshine plate around the screws.
7、因阳光板的线性膨胀系数比金属材料约大6倍,所以,在板上先钻好孔后,才用自攻螺丝固定,并且自攻螺丝一定要打在孔径中间。
7. Because the linear expansion coefficient of the solar panel is about 6 times larger than that of the metal material, the self tapping screw shall be used for fixing after the hole is drilled on the panel, and the self tapping screw must be punched in the middle of the hole diameter.
 
安装过程中大家一定要注意,不要与未干水泥面、酸、碱性物质表面接触。也不要与苯、汽油、四氯化碳、天那水、松节油等有机溶剂或含有此类成分的胶水,油漆相接触,否则的话会损坏阳光板,从而影响阳光板的使用年限!
During the installation, we must pay attention not to contact with the wet cement surface, acid and alkaline material surface. Do not contact with benzene, gasoline, carbon tetrachloride, Tennessee water, turpentine and other organic solvents or glue and paint containing such components, otherwise it will damage the solar panel, thus affecting the service life of the solar panel!
阳光板厂家在上述内容中为大家介绍了一下,固定时的注意事项,相信大家看完之后会对此有进一步的认识和了解,如若您想要了解更多的内容,可以多多关注我们的网站http://www.wanzhongyue.com
In the above content, the sunshine board manufacturer introduced the fixed precautions for you. I believe you will have further understanding and understanding after reading. If you want to know more, you can pay more attention to our website http://www.wanzhongyue.com
了解一下,总之,就是希望我们为大家总结的内容能够帮助到大家。
Let's have a look. In a word, I hope that what we have summarized for you can help you.
相关新闻


  天桥区欣飞板业经销处            联系人:焦经理            座机:15806664558
 手机:15806664558        15066129603       13969012996
  技术支持: 济南诺商   鲁ICP备14016125号 网站地图 XML TXT

统一服务热线

15806664558 

鲁公网安备 37010502001033号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】