欢迎访问欢迎访问天桥区欣飞板业经销处!
阳光板、耐力板、FRP(波浪瓦)、灯箱片
我们只生产质量保障的阳光板等产品

统一服务热线:

15806664558

首页>新闻中心>如何解决阳光板的隔热问题
产品分类 PRODUCTS
联系我们

天桥区欣飞板业经销处

联系人:焦经理 

电话:15806664558 

手机:15806664558
          15066129603
          13969012996
地址:济南市历城区历山北路佳园装饰材料南区A7-30号


如何解决阳光板的隔热问题

来源:http://www.wanzhongyue.com/ 日期:2020-09-08 发布人:julong 浏览次数:

44厂家讲解阳光板的隔热措施,阳光板是具备隔热的功能的,不会导致室内温度过高。
Jinan sunshine board manufacturers explain the heat insulation measures of the sunlight board. The sunlight plate has the function of heat insulation, which will not lead to the indoor temperature being too high.
聚碳酸酯阳光板的隔热效果对所有人都是明显的,所以当夏季阳光越来越强时,日光室的温度会越来越高。
The insulation effect of polycarbonate solar panels is obvious to everyone, so when the sun is stronger in summer, the temperature of the sunlight room will be higher and higher.
如何有效地解决阳光板的隔热问题,小编总结了一下,要注意到这些问题就行了,如果你想隔热,可以用深色的PC阳光板,这样可以起到很好的隔热效果。如果条件允许,可以在PC阳光板上加上其他遮挡物,同样透明的面板,也可以起到很好的隔热效果。另外,如果颜色固定,加厚板的结构层数,如PC阳光板的四层结构,可以起到良好的隔音隔热效果。
How to effectively solve the heat insulation problem of the sun board, the small editor summed up, should pay attention to these problems on the line, if you want to heat insulation, you can use dark PC sun board, which can play a good heat insulation effect. If conditions permit, you can add other shielding on the PC sun board. The same transparent panel can also play a good heat insulation effect. In addition, if the color is fixed, the number of structural layers of the thickened plate, such as the four layer structure of PC sunshine board, can play a good sound insulation and heat insulation effect.

阳光板在实际的安装过程当中,也要注意一些问题才行的。在实际使用过程中,多层阳光板仍体现出许多性能,在某些特定场合,需求量仍然很大。安装施工时,要固定好。同时阳光板的紫外表面应朝向阳光,安装时不应损坏阳光板表面的保护膜,但应在安装完成后将其撕下。
Sunshine board in the actual installation process, but also pay attention to some problems. In the actual use process, the multi-layer solar panel still reflects many properties, in some specific occasions, the demand is still very large. During installation and construction, it should be fixed well. At the same time, the UV surface of the sunlight plate should face the sunlight. The protective film on the surface of the sunlight plate should not be damaged during installation, but it should be torn off after the installation.
聚碳酸酯阳光板接缝处应留有适当的膨胀空间,并应注意预埋深度。如果需要切割PC阳光板的尺寸,应将板固定,以避免切割过程中的振动,切割工具应使用电动工具,以确保切割的准确性和质量。一般施工的时候注意到一些问题就行了。
Appropriate expansion space should be reserved at the joint of polycarbonate sunshine board, and attention should be paid to the embedded depth. If it is necessary to cut the size of PC sunshine board, the plate should be fixed to avoid vibration during cutting. The cutting tool should use electric tool to ensure the accuracy and quality of cutting. It is enough to notice some problems in general construction.
相关新闻


  天桥区欣飞板业经销处            联系人:焦经理            座机:15806664558
 手机:15806664558        15066129603       13969012996
  技术支持: 济南诺商   鲁ICP备14016125号 网站地图 XML TXT

统一服务热线

15806664558 

鲁公网安备 37010502001033号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】