阳光板横梁间距与阳光板厚度的关系
来源：http://www.wanzhongyue.com/ 日期：2021-02-24 发布人：julong 浏览次数：次
阳光板主要分二种：
There are two main types of solar panels
空心阳光板：正常空心阳光板从4毫米厚开始，横梁间距在40公分以内为好； 正常空心阳光板从6毫米厚开始，横梁间距在50公分以内为好； 正常空心阳光板从8毫米厚开始，横梁间距在60公分以内为好，
Hollow sunlight board: the normal hollow sunlight board starts from 4mm thick, and the beam spacing is within 40cm; the normal hollow sunlight board starts from 6mm thick, and the beam spacing is within 50cm; the normal hollow sunlight board starts from 8mm thick, and the beam spacing is within 60cm,
正常空心阳光板从10毫米厚开始，横梁间距在80公分以内为好， 正常空心阳光板从12毫米厚开始，横梁间距在90公分以内为好， 正常空心阳光板从16毫米厚开始，横梁间距在1.2米以内为好；所以阳光板越厚，横梁间距可以大一些，那样会有效抗风压和雪压负载量。
The normal hollow sunlight board starts from 10 mm thick, and the beam spacing is within 80 cm; the normal hollow sunlight board starts from 12 mm thick, and the beam spacing is within 90 cm; the normal hollow sunlight board starts from 16 mm thick, and the beam spacing is within 1.2 m; therefore, the thicker the sunlight board is, the larger the beam spacing can be, which will effectively resist wind pressure and snow pressure load.
实心阳光板： 正常实心阳光板从2毫米厚开始，横梁间距在20公分以内为好， 正常实心阳光板从3毫米厚开始，横梁间距在30公分以内为好. 正常实心阳光板从4毫米厚开始，横梁间距在50公分以内为好.等等，如果实心阳光板弯曲加工搭接时，横梁间距可以再宽一点，主要弯曲实心耐力板有很好的支撑力。
Solid sunlight board: the normal solid sunlight board starts from 2mm thick, and the beam spacing is within 20cm. The normal solid sunlight board starts from 3mm thick, and the beam spacing is within 30cm The normal solid sunlight plate starts from 4mm thick, and the beam spacing is within 50cm. Etc., if the solid sunlight plate is bent and overlapped, the beam spacing can be wider, and the main bending solid endurance plate has good support.
