欢迎访问欢迎访问天桥区欣飞板业经销处!
阳光板、耐力板、FRP(波浪瓦)、灯箱片
我们只生产质量保障的阳光板等产品

统一服务热线:

15806664558

首页>新闻中心>阳光板安装过程中边缘的紧固问题如何解决?
产品分类 PRODUCTS
联系我们

天桥区欣飞板业经销处

联系人:焦经理 

电话:15806664558 

手机:15806664558
          15066129603
          13969012996
地址:济南市历城区历山北路佳园装饰材料南区A7-30号


阳光板安装过程中边缘的紧固问题如何解决?

来源:http://www.wanzhongyue.com/ 日期:2021-08-24 发布人:julong 浏览次数:

济南阳光板主要由聚碳酸酯制作。阳光板普遍用于各种建筑采光屋顶和室内装饰装修;火车站和航空港等待厅及过街天桥、通道顶棚;汽车站、轮渡码头等公共服务设施的顶盖和装潢园林小品;
Jinan sunshine board is mainly made of polycarbonate. Sunlight board is widely used for daylighting roof and interior decoration of various buildings; Waiting hall of railway station and airport, overpass and corridor ceiling; The top covers and decorative garden sketches of public service facilities such as bus stations and ferry terminals;
天窗、地窖、拱形屋顶及商场顶棚;无论干式装配法还是湿式装配法,无论水平的、垂直式的和倾斜的安装。
Skylights, cellars, arched roofs and shopping malls; Whether dry assembly method or wet assembly method, regardless of horizontal, vertical and inclined installation.
今天小编为大家讲解一下在济南阳光板安装工程中重要的边缘的紧固问题,必须注意以下两点:
Today, Xiaobian will explain the important edge fastening problems in Jinan sunshine board installation project. We must pay attention to the following two points:
济南阳光板
无论干式装配法还是湿式装配法,无论水平的、垂直式的和倾斜的安装。在中空阳光板安装工程中重要的是边缘的紧固,一定注意以下两点:
Whether dry assembly method or wet assembly method, regardless of horizontal, vertical and inclined installation. In the installation of hollow solar panels, it is important to fasten the edges. Pay attention to the following two points:
(1)在连接型材中或在镶框的镶槽中一定留出有用的空间以便板材受膨胀和受载位移。中空阳光板的线性热膨胀系数是7×10m/m.k,即温度每升高1℃,1m×1m板顺着长度方向各膨胀0.075mm,用户须根据工程所在地分四季温差,算出安装间隙的数据:如北方地区,高温度为40℃,低温度为-30℃,1m×1m的板材安装预留间隙为0.07×70=4.9mm
(1) A useful space must be reserved in the connecting profile or in the slot of the frame so that the plate can expand and move under load. The coefficient of linear thermal expansion of hollow sunlight plate is 7 × 10m / m.k, i.e. 1m for every 1 ℃ rise in temperature × The 1m plate expands by 0.075mm along the length direction. The user must calculate the installation clearance data according to the temperature difference of the project site in four seasons: for example, in the north, the high temperature is 40 ℃, the low temperature is - 30 ℃, 1m × The reserved gap for 1m plate installation is 0.07 × 70=4.9mm
(2)板材被夹持的部份里至少要含有一条箭肋,或者在板材的边缘被啮合的部份小20mm。
(2) The clamped part of the plate shall contain at least one arrow rib, or the meshed part at the edge of the plate shall be less than 20mm.
一般来说,型材构成的插槽总深 度应包括20mm的啮合加上因热膨胀及因荷载引起变形须预留出的间隙。
Generally speaking, the total depth of slots composed of profiles shall include 20mm engagement plus the clearance to be reserved due to thermal expansion and deformation caused by load.
阳光板密封技术要求板材边缘都是光滑孔和压缩空气无任何杂质干燥的。密封材料的粘性物质应对山东阳光板无损害密封带应有良好的耐候性且在长时间内不应失去粘性和机械强度不要打磨或用强碱清洗阳光板不要用硬刷子擦表面以免产生拉毛现象。
The sealing technology of sunshine plate requires that the edges of the plate are smooth, and the holes and compressed air are dry without any impurities. The viscous substance of the sealing material shall not damage the Shandong sunshine plate. The sealing belt shall have good weather resistance and shall not lose its viscosity and mechanical strength for a long time. Do not polish or clean the sunshine plate with strong alkali. Do not wipe the surface with a hard brush to avoid galling.
相关新闻


  天桥区欣飞板业经销处            联系人:焦经理            座机:15806664558
 手机:15806664558        15066129603       13969012996
  技术支持:网站建设·推广运营 网站地图 XML TXT

统一服务热线

15806664558 

鲁公网安备 37010502001033号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】