耐力板颜色偏差是什么原因造成？
耐力板颜色偏差是什么原因造成？
来源：http://www.wanzhongyue.com/ 日期：2022-02-26 发布人：julong 浏览次数：次
What causes the color deviation of endurance board?
pc板常见的颜色为透明、湖蓝、草绿、乳白等，但有些朋友在不同厂家买到的耐力板会有颜色偏差的现象。这是为什了？
The common colors of PC boards are transparent, lake blue, grass green, milky white, etc., but some friends buy endurance boards from different manufacturers will have color deviation. Why is this?
以乳白色的耐力板来说，有的厂家生产出来的是比较温文的乳白色，有的厂家生出来的比较暗甚至带点其他颜色。其实耐力板的颜色不同跟厂家用是色母粒材料有很大的关系，不同色母粒供应厂家生产出来的板材的颜色会有差异。另外一个原因是跟生产厂家的技术有关，部分厂家用回收料做出来的pc板材的色差会比较严重，而且这些厂家一般都没有自己的材料配方，所以就导致每次生产出来的产品都有差异。
For the milky white endurance board, some manufacturers produce more gentle milky white, and some manufacturers produce darker or even some other colors. In fact, the different color of endurance board has a great relationship with the color masterbatch materials used by manufacturers. The color of boards produced by different color masterbatch suppliers will be different. Another reason is related to the technology of manufacturers. The color difference of PC plates made from household recycled materials in some factories will be serious, and these manufacturers generally do not have their own material formula, so the products produced each time are different.
所以想要质量稳定的pc板材，还是要选择正规牢靠的阳光板厂家。
Therefore, if you want PC board with stable quality, you should choose regular and reliable sunshine board manufacturers.
4，阳光板紫外线防护层的关键质量点是什么？
4. What are the key quality points of the UV protective layer of the sunlight plate?
阳光板紫外线防护层的厚度，通俗理解的话，比头发丝还要细很多倍，如何均匀地挤出分布到两米一的宽度上？首先是通过阳光板采用的意大利进口专用阳光板生产线来保障，其次是生产过程中的控制，阳光板的质量控制部门，每隔几个小时，在线取样，宽度方向检测40个点，用显微镜检测紫外线防护层的厚度，从而控制厚度的稳定性。
The thickness of the ultraviolet protective layer of the sunlight plate is many times thinner than the hair. How can it be evenly extruded and distributed to the width of two meters and one meter? Firstly, it is guaranteed by the special sunshine board production line imported from Italy. Secondly, it is the control in the production process. The quality control department of the sunshine board takes online samples every few hours, detects 40 points in the width direction, and detects the thickness of the ultraviolet protective layer with a microscope, so as to control the stability of the thickness.
如果厚度不能够均匀，大家想想会有什么问题？势必在薄弱的地方会率先老化，板材看上去是“花”的。
If the thickness is not uniform, what problems will we have? It is bound to take the lead in aging in weak places, and the plate looks "flower".
5，阳光板紫外线防护层可以肉眼看出来吗？
5. Can the ultraviolet protective layer of the sunlight plate be seen with the naked eye?
由于厚度的关系，阳光板紫外线防护层肉眼不可视，坊间有一些通过观察断层颜色等方法，不是很科学。准确的检测方式需要专用的测试设备，优景阳光板的生产工厂配置有这些设备。
Due to the thickness, the ultraviolet protective layer of the sunlight plate is invisible to the naked eye. There are some methods in the market, such as observing the fault color, which are not very scientific. The accurate detection method requires special test equipment, which are configured in the production plant of Youjing sunshine board.
