欢迎访问欢迎访问天桥区欣飞板业经销处!
阳光板、耐力板、FRP(波浪瓦)、灯箱片
我们只生产质量保障的阳光板等产品

统一服务热线:

15806664558

首页>新闻中心>济南阳光板H条的应用解析
产品分类 PRODUCTS
联系我们

天桥区欣飞板业经销处

联系人:焦经理 

电话:15806664558 

手机:15806664558
          15066129603
          13969012996
地址:济南市历城区历山北路佳园装饰材料南区A7-30号


济南阳光板H条的应用解析

来源:http://www.wanzhongyue.com/ 日期:2019-05-24 发布人:admin 浏览次数:

  济南阳光板H条的应用解析
  Application of H-strip in Jinan Sunshine Plate济南阳光板-H条衔接件,采用聚碳酸酯济南料消费,由于形似“工字”,也有人称其济南工字衔接件,两侧设有启齿卡槽,停止插接阳光板边部,主要用于2件济南阳光板之间横向延伸衔接,起稳定板材,避免接缝渗漏的作用。
  Jinan Sunshine Plate-H strip connector is consumed by polycarbonate Jinan material. It is also called Jinan I-shaped connector because it resembles "I-word". There are teeth chucks on both sides to stop inserting the edge of the sunshine plate. It is mainly used for the lateral extension and connection between two Jinan sunshine plates to stabilize the plate and avoid leakage of the joints.
  特性
  Characteristic
  装置简易,本钱低;
  The device is simple and the cost is low.
  阳光板拼接无需对齐龙骨,不受板材宽度限制,进步装置设计自在度。
  Sunshine plate splicing does not need alignment keel, is not limited by the width of the plate, and improves the design freedom of the device.
  济南阳光板-H条衔接件的材质与济南阳光板分歧,热收缩系数相同,与其他材质的衔接件相比,不易呈现因气候、温度的变化形成的变形/缝隙,招致渗漏风险。
  The material of Jinan Sunshine Plate-H joint is different from that of Jinan Sunshine Plate, and its thermal shrinkage coefficient is the same. Compared with other materials, it is not easy to present deformation/crack caused by climate and temperature changes, which leads to leakage risk.
  引荐运用范围
  Recommended scope of application
  简易的屋面,或简单的掩盖挡雨棚(如车棚);室内隔断,屏风;户外运用不倡议用于墙面,及板材长度较短(小于2m)的中央。
  Simple roofing, or simple shelter canopy (such as car shed); indoor partition, screen; outdoor use is not recommended for wall, and the length of the board is shorter (less than 2 m) in the center.
  装置要点
  Main points of installation
  将板材边侧插入H条两侧的启齿槽内,沿着长度方向拉动板材或H条到适宜的装置位,经过H条和板材间的摩擦作用夹紧固定,完成衔接,装置可参考下述办法:
  Insert the edge of the plate into the opening slots on both sides of H strip, pull the plate or H strip along the length direction to the appropriate device position, clamp and fix through the friction between H strip and H strip, and complete the connection. The device can refer to the following methods:
  1. 先固定一张阳光板到装置位置。
  1. Fix the first sunshine plate to the device position first.
                  济南阳光板
  2. 相邻的第二张阳光板上下各用一颗螺钉预固定在装置位,两张板间留好适宜的H条位置。
  2. A screw is used to pre-fix the two adjacent sunshine panels, and H strips are reserved between the two panels.
  3. H条头部钻好一个小孔后,将其卡入如两张板之间。
  3. After drilling a small hole in the head of H bar, it is stuck between two boards.
  4. 用适宜的铁钩勾入小孔内,将H条沿着长度方向拉动到适宜位置。
  4. Use appropriate hooks to hook into the hole and pull H bar along the length direction to the appropriate position.
  为增加接位防水才能,在装置前可在H条两侧卡槽内预先半注入防水密封胶。
  In order to increase the waterproofing ability of the joint, the waterproof sealant can be pre-injected into the chutes on both sides of H strip before the installation.
  H条上不打螺钉固定,仅作板材衔接,不用固定在底部檩条上。
  H strip is not fixed by screw, only for plate connection, not fixed on purlin at the bottom.
  H条衔接的密封效果仅能用于一些简易的、简单的掩盖层,防水才能普通。
  The sealing effect of H-bar connection can only be used in some simple and simple covering layer, so waterproofing can be common.
 
相关新闻


  天桥区欣飞板业经销处            联系人:焦经理            座机:15806664558
 手机:15806664558        15066129603       13969012996
  技术支持: 济南诺商   鲁ICP备14016125号 网站地图 XML TXT

统一服务热线

15806664558 

鲁公网安备 37010502001033号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】