欢迎访问欢迎访问天桥区欣飞板业经销处!
阳光板、耐力板、FRP(波浪瓦)、灯箱片
我们只生产质量保障的阳光板等产品

统一服务热线:

15806664558

首页>新闻中心>PC耐力板材料怎样才是合格的?
产品分类 PRODUCTS
联系我们

天桥区欣飞板业经销处

联系人:焦经理 

电话:15806664558 

手机:15806664558
          15066129603
          13969012996
地址:济南市历城区历山北路佳园装饰材料南区A7-30号


PC耐力板材料怎样才是合格的?

来源:http://www.wanzhongyue.com/ 日期:2019-06-17 发布人:admin 浏览次数:

  当PC耐力板在各种民用、公共以及工业等场所运用的时分,主要是作为室内装饰装修与采光,所以在一些范畴,广告牌、花园等等随处可见P耐力板的身影。那么什么样的资料才算合格的?
  When PC endurance board is used in various civil, public and industrial places, it is mainly used as interior decoration and lighting, so in some areas, billboards, gardens and so on, P endurance board can be seen everywhere. So what kind of information is qualified?
  在装置PC耐力板的时分需求用到相应的密封资料,这种资料属于粘性物质,所以请求做到如密封胶等密封资料不会对PC耐力板形成伤害。同时,作为它的密封带要有良好的抗撕性能。
  When installing the PC endurance board, the corresponding sealing data is needed. This data belongs to viscous material, so the request for sealing data such as sealant will not harm the PC endurance board. At the same time, as its sealing belt, it should have good tear resistance.
  济南阳光板
  Jinan Sunshine Plate
济南阳光板
  为了满足施工中外型变化的需求,需求对PC耐力板停止钻孔、切割,空板普通尖利的刀片就能够了;用普通的麻花钻即可开孔,但应先钻小孔,然后步扩展到所需直径。孔离板材边缘的尺寸应不少于40MM,一切钻孔直径应大于螺栓直径,以顺应板的热胀冷缩。
  In order to meet the needs of large-scale changes in construction, it is necessary to stop drilling and cutting the PC endurance plate, so that the ordinary sharp blade of the empty plate can be used; the ordinary twist drill can be used to open the hole, but the small hole should be drilled first, and then gradually expand to the required diameter. The dimension of the hole away from the edge of the plate shall be no less than 40MM, and the diameter of all boreholes shall be greater than the diameter of bolts to comply with the thermal expansion and contraction of the plate.
  济南阳光板
  Jinan Sunshine Plate
  另外,为PC耐力板选用的粘性物质应能在冷热温度突变和高温的环境下长期坚持粘着性能;密封带有良好的耐候性,且长时间不失去粘性和机械强度;板端的密封应当对水,空气和尘埃是透不过的。
  In addition, the viscous material selected for PC endurance board should be able to adhere to the adhesion performance for a long time under sudden changes in temperature and high temperature; the seal has good weatherability, and does not lose viscous and mechanical strength for a long time; the seal at the end of the board should be permeable to water, air and dust.
  假如PC耐力板中如有小虫,尘埃,潮气或其它物质,施工时两端启齿的密封处置很重要,直接决议了板材的美观性、透明度、隔热性,同时也将影响板材后期的运用效果和运用寿命。
  If there are insects, dust, moisture or other substances in PC endurance board, the sealing treatment of opening teeth at both ends is very important during construction, which directly decides the aesthetics, transparency and heat insulation of the board, and will also affect the later application effect and service life of the board.
相关新闻


  天桥区欣飞板业经销处            联系人:焦经理            座机:15806664558
 手机:15806664558        15066129603       13969012996
  技术支持: 济南诺商   鲁ICP备14016125号 网站地图 XML TXT

统一服务热线

15806664558 

鲁公网安备 37010502001033号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】